Miscellaneous Parts




Photocell Corp. PB200 Cadmium Sulfide (CdS) Photocells, 1/4" diameter x 1/2" long glass enclosed with wire leads, measure 1M dark, 1K in bright room light.   NOS -- $1ea

Fuses -- 3AG, 1/2 amp, 250V, fast blow, 40 pieces. NOS! $7

Sharp CE-155 8K Byte Memory Module. NOS $5

Motorola TLN6824A Vibrasender -- Freq. 1B, 107.2 Hz -- $1

Motorola 48B800145-A 6 pin vibrators, pulls. -- $10 pair

Fahnestock (and a few other brands) clips -- These are old, brass, used, a few different sizes, all singles.  70 parts total. -- $20 all

Antique boxes
DM-36-D Dynamotor spare brush box -- $2
Bliley BC3 Crystal, includes data sheet. Top rough. -- $5
Continental Carbomite Resistors -- $5

NCR 525 Mb Data Cartidge No. 279996 -- NOS $10



Mechanical Things



Synchro Transmitters -- IMC Magnetics, Model 008-216, 26V 400Hz, .75" diameter housing, .120" dia. shaft, flying leads.   These will drive a typical Radio Compass Indicator.   NOS.   $20 ea.



couplings
Insulated Couplings -- all for 1/4" shafts. $5 ea.

watersink

Water cooled heatsinks -- 12" x 8" used, drilled for TO-3's plus a few diodes.   Back is flat.   3/8" water lines.   $50 pair



Sperry Gyroscope bearings? part no. 165899.   10 pieces packed in oil in a glass bottle sealed with black glop in June 1944.   $10

Craftsman (Atlas) -- Lathe screw for a 54" bed (36" work space) lathe.  Used, good condition.   $100

Comair Rotron -- VK12B7 blower w/tachometer output.   5" square by 1.4" overall, 12VDC @ 1.3A nominal.   33CFM @ 0" H2O / 18CFM @1.2" H2O & 14V.   A perfect fan for a pair of 4CX250B's or similar tubes.   NOS, $25 ea.

ILG Electric Ventilation -- 17-18-022A squirrel cage type fan.   Encased motor, 6" diameter by 6" long, 115/230 VAC 1.6A/.8A 50/60Hz 3000 RPM, attached to a 181-009-EA fan housing about 4" by 9" diameter, 4+" round intake, 3+" x 4-3/4" rectangular output flange, weighs 25 lbs. Removed from a RCA transmitter that employed a 4CX5000A.   Used -- $45

NOS fan that fits some Japanese radio (Kenwood, Yeasu, Icom, JRL?)...marked: 57 10.01 100V.   The wires from the motor are about 4' long and are terminated in a 2 pin JST connector.   The impeller has 8 blades and is 7 cm in diameter.   It is mounted to a U shaped metal frame with four mounting holes spaced 5cm by 9cm -- $10


Sodeco, Model RG-162E 1/25 & 1/50. Two 12VDC Resetable Impulse counters. Used, working. -- $10 both