*** Tubes ***

These are all old RCA, Sylvania, GE, Westinghouse etc.
No "Realistic", or modern imports in the group.

2C46 Lighthouse tube pull $3
2D21 pulls $5 ea

6AK5 pulls $2 ea
6AL5 pulls $1 ea
6AL5 RCA NIB 4 for $10
6CB6 pulls $2 ea
6ER5 RCA NIB $5

Nuvistors
6CW4, 6DS4, 13CW4, 7586 NIB $10 ea.
6CW4 RCA pulls, checked OK on a curve tracer $5 ea. 10 for $40

Sweep Tubes
6DQ6B RCA likely NIB + GE 6DQ6B pull -- $10 both
6JF6 NIB -- $15 pair
6JS6C Magnavox, New? in wrong box -- $10
6LB6 Magnavox (branded) NIB -- $20 pair (two pair available)

12AT7 pulls $3 ea
12AU7A Sylvania NIB $10 ea
12AX7 pulls $5 ea
12AY7 pulls $3 ea

15E Eimac (60 years old!) NIB $10

403B Western Electric pull $5
404A Western Electric pulls $10 ea

927 RCA $20

4637 (RCA) pull $20
5663 pull $5

5814A (12AU7A) RCA NIB $10 ea
5814WA pulls $5 ea

5823 RCA $20

5879, 7056 NIB $7 ea
5879 pulls $3 ea

5963 (12AU7) pull $5

6386 RCA NIB last pair, $600
6386 GE 5 Star NOS $300
6442 pulls $5 ea

6771 Planar Triode pull $5
7554 Pencil tube pull $5
7843 pulls $10 ea or... 3 for $25

Eimac JAN 7580W/4CX250R pulls. Last pair: $80

Spare tube lot, plus a few, for a Collins KWM2 -- NIB $120

6146W (2) Sylvania
6AU6A
6AZ8 (4)
6BN8 (3)
6CL6 (2)
6DC6
6EB8 (2)
6U8A (4)
12AT7WB/6201 (2)
-- The little ones were mostly made by RCA, with a couple each Sylvania, GE & Raytheon.


*** Tube Sockets and Accessories***

Eimac -- Databook set circa 1985 in two large yellow Eimac 3 ring binders. Includes data sheets from 1976 edition and earlier. Very good condition. $200

Birnbach 434 "50 watt" socket. Base is cracked clean through adjacent to opposite contacts, not noticeable from the top. Still quite useable as-is, or glue it. $8

Cinch Octal sockets, black phenolic. NOS $2 ea

Eimac HR-8 plate dissipator used, a mite tarnished $10

Eimac HR-6 plate dissipators used, tarnished, pair $10

Eimac SK-620 sockets, "unused" pair. One is a SK-620; the other a SK-620A. Probably 40 years old, a bit tarnished from storage, and unused except the heater pins on one were once soldered... probably to check some tubes. $60 for the pair.

Eimac 3" (or so) diameter Grid lead contact & 6" wire to lug as used on 3CX2500, 3CX3000, leaded versions etc. $5 pair

Erie Chemflex SO-427-3 Teflon insulated 7 pin miniature tube sockets including saddle w/ lugs, NOS -- $5 ea

Johnson 122-101 ceramic septar 7 pin socket (accepts 826, 832, 4D32, PL6549, PL6569, etc). These were likely a special order as they have the standard ground shield but, no ground clips. NOS though, a bit dusty & tarnished from long storage $10ea

Johnson 122-237 ceramic giant 7 pin socket for 813, etc. NOS, $15

Johnson 124-115-2 UHF socket similar to Eimac SK-620. NOS, but, a mite tarnished from age. $40

Pair of ceramic giant 7 pin sockets for 813, etc. Used, $15 pair

6 inch plate leads. National medium (.566") grid clips on one end; solder lugs on the other. The leads are covered with 16 each 5/16" diam. ceramic insulators. $5 pair

Pomona Electronics TVS-7 & TVS-9 test extender sockets for 7 & 9 pin miniature tubes. Little used. $40 both.

4 Pin Octal size female cable connector with hood. Used $3

6 Pin Octal size female cable connector with hood. NOS $5

9 Pin Octal size male cable connector with hood & clamp. NOS $7

11 pin Octal size Plugs. Amphenol 86-CP11 or similar. New $5 ea.

11 pin Octal size Plugs. Amphenol 86-CP11 or similar. Used $3 ea.

11 pin Octal size sockets, round (may be used on cable or chassis). Used $3 ea.

11 pin Octal size sockets, chassis mount w/ears. NOS $7 ea

11 pin Octal size M&F pair cable connectors with hoods. NOS $15

IERC Heat Dissipating tube shield, size T12. $10

Eight assorted 7 & 9 pin miniature tube shields. $4 all